Everything you need to know about a hygienic shower. Do-it-yourself installation of a concealed hygienic shower

To connect plumbing fixtures to the water supply network, a flexible water supply is used. It is in demand when connecting faucets, showers, toilets and other points of water intake, and greatly simplifies the installation process. Flexible piping is also used when installing gas equipment. It differs from similar devices for water in manufacturing technology and special safety requirements.

Characteristics and types

Flexible hose for plumbing is a hose of different lengths, made of non-toxic synthetic rubber. Due to the elasticity and softness of the material, it easily takes the desired position and allows installation in hard-to-reach places. To protect the flexible hose, the upper reinforcing layer is designed in the form of a braid, which is made of the following materials:

aluminum. Such models withstand no more than +80 ° C and retain functionality for 3 years. In high humidity, aluminum braid is prone to rust.
Of stainless steel. Thanks to this reinforcing layer, the service life of the flexible water supply is at least 10 years, and the maximum temperature of the transported medium is +95 °C.
Nylon. Such a braid is used for the manufacture of reinforced models that can withstand temperatures up to +110 ° C and are designed for intensive use for 15 years.

Nut-nut and nut-nipple pairs are used as fasteners, which are made of brass or stainless steel. Devices with different indicators of permissible temperature differ in the color of the braid. Blue ones are used to connect to a pipeline with cold water, and red ones - to hot water.

When choosing a water supply, you need to pay attention to its elasticity, reliability of fasteners and purpose. It is also mandatory to have a certificate that excludes the release of toxic components by rubber during operation.

Features of gas connections

When connecting gas stoves, columns and other types of equipment, flexible connections are also used. Unlike models for water, they are yellow and are not tested for environmental safety. For fixing, end steel or aluminum fittings are used. There are the following types of devices for connecting gas appliances:

PVC hoses reinforced with polyester thread;
synthetic rubber with stainless steel braid;
bellows, made in the form of a corrugated stainless steel tube.

Holding "Santekhkomplekt" offers engineering equipment, fittings, plumbing and accessories for its connection to communications. The assortment is represented by products and materials of well-known foreign and domestic manufacturers. Discounts apply for bulk purchases, and product quality is confirmed by standard certificates. For information support and assistance, a personal manager is assigned to each client. The ability to arrange delivery within Moscow and to other regions of the Russian Federation allows you to quickly receive the purchased goods without any hassle.

Drainage is a hydro-reclamation measure to remove excess groundwater.

If water does not leave the territory of the site for a long time, soil gleying occurs, if shrubs and trees quickly disappear (wet), it is urgent to take measures and drain the site.

Reasons for waterlogging the soil

There are several reasons for waterlogged soils:

clay heavy soil structure with poor water permeability;
an aquiclude in the form of gray-green and red-brown clays is located close to the surface;
high occurrence of groundwater;
technogenic factors (construction of roads, pipelines, various facilities) that impede natural drainage;
violation of the water balance by the construction of irrigation systems;
the landscape area is located in a lowland, a beam, a hollow. In this case, precipitation and water inflow from higher places play an important role.

What causes excess moisture in the soil

You can see the results of this phenomenon yourself - trees and shrubs are dying. Why is this happening?

the oxygen content in the soil decreases and the content of carbon dioxide increases, which leads to a violation of the processes of air exchange, water regime and nutrition in the soil;
oxygen starvation of the root-forming layer occurs, which leads to the death of plant roots;
the intake of macro and microelements by plants (nitrogen, phosphorus, potassium, etc.) is disrupted, because excess water washes out mobile forms of elements from the soil, and they become inaccessible for assimilation;
there is an intensive breakdown of proteins and, accordingly, the processes of decay are activated.

Plants can tell at what level groundwater occurs

Take a close look at the flora in your area. The species inhabiting it will tell you at what depth the groundwater layers are located:

top water - in this place it is best to dig a reservoir;
at a depth of up to 0.5 m - grow marigold, horsetail, varieties of sedge - blister, holly, fox, Langsdorf reed grass;
at a depth of 0.5 m to 1 m - meadowsweet, canary grass,;
from 1 m to 1.5 m - favorable conditions for meadow fescue, bluegrass, mouse pea, rank;
from 1.5 m - wheatgrass, clover, wormwood, plantain.

What is important to know when planning site drainage

Each group of plants has its own moisture needs:

with a groundwater depth of 0.5 to 1 m, vegetables and annual flowers can grow on high beds;
the depth of the water reservoir up to 1.5 m is well tolerated by vegetable crops, cereals, annuals and perennials (flowers), ornamental and fruit and berry shrubs, trees on a dwarf rootstock;
if groundwater at a depth of more than 2 m, you can grow fruit trees;
the optimal depth of groundwater for agriculture is from 3.5 m.

Do you need site drainage?

Record your observations at least for a while. You yourself will be able to understand how much drainage is needed.

Maybe it makes sense to simply redirect melt and sediment water along a bypass channel, and not let it flow through your site?

Perhaps it is necessary to design and equip a storm drain and improve the composition of the soil, and will this be enough?

Or is it worth making a drainage system only for fruit and ornamental trees?

The exact answer will be given to you by a specialist, whom we strongly recommend calling. But after reading this article, you will gain some awareness in this matter.

At the end of the technological and production tasks associated with the arrangement of the sewer system in an apartment building, an industrial building, as well as in a private household, it is required to test the system involved using the forced spill method. This task was applied to identify possible defects or improper installation of the entire sewer part involved, and the act of testing the internal sewerage and drain systems will be material evidence of work on the acceptance of the object.

A visual check should be accompanied by entering into the test report of internal sewerage and drain systems according to SNIP, which is currently represented by the current regulations of the appendix of the D series, which corresponds to SP 73.13330.2012 "Internal sanitary systems of the building", recently a new one has been applied updated working version according to SNiP 3.05.01-85.

In the process of carrying out repairs, the owners of the premises are trying to give the bathroom as much functionality as possible. To this end, in addition to the toilet, they install a bidet for convenient hygiene procedures. If the bathroom is small, then there may simply not be a place for this. If you are faced with just such a situation, then the way out of it can be the installation of a combined plumbing fixture. An addition is a hygienic toilet shower with a mixer, which practically does not take up space, but brings great benefits.

A modern hygienic shower is a simplified version of the well-known bidet, combining the functions of two plumbing fixtures. Its use in separate bathrooms is especially relevant, since there is no need to visit several rooms one after the other.

The device consists of the following components:

Mixer with control valve. In high-quality models, there is an additional push button to turn on the water.
Flexible hose with watering can. The shape and dimensions of the watering can are ergonomic enough for ease of use. The nozzles have a direction that ensures the movement of water jets directly in front of them, excluding their spraying to the sides.
watering can holder. It is usually mounted on the wall next to the faucet so that it can be easily reached by hand. A shower head is inserted into the holder.
Thermostat (for certain models). It allows you to adjust the temperature of the incoming water. Once the thermostat has been set to a certain temperature, no further settings can be made. The thermostat is installed on more expensive models.

All elements of the shower are chrome-plated, and the flexible hose is covered on the outside with a chrome-plated braid.

Tip: Choose a shower model that has an additional water release button on the watering can. This device is more convenient and safe to use. You will not need to open and close the mixer valve, which is not always convenient to do.

Benefits of a toilet shower

We list the advantages of a hygienic shower for a toilet bowl with a mixer:

Read about how to make it in a separate material on the site.

Do-it-yourself installation of this type of hygienic shower in the toilet is carried out in the following sequence:

the old lid is removed from the toilet, and a bidet lid is attached instead;

the water in the system is blocked;

the tank is completely drained;

the supply hose is unscrewed, through which water flows into the tank;

a tee is installed between the water pipe and the tank. One end of the tee enters the tank, and the other is connected to the toilet lid;

if the device is controlled by an electric drive, then it is connected to a socket specially designed for this purpose.

When buying a hygienic toilet shower, try to focus not only on the price, but also on well-known manufacturers that specialize in the production of such accessories. Thus, you will provide yourself with high-quality equipment, the purchase of which you will not regret.

Hygienic shower in the toilet photo

Here are some photos on the topic of our article.

Today, such plumbing equipment as a hygienic shower in the toilet does not surprise anyone. More puzzling is how they got along without it before. But there is an explanation for this: plastic and propylene pipes, fittings, faucets without a spout have appeared on the market relatively recently. With cast iron pipes, it was much more difficult to make a hygienic shower in the toilet.

The purpose of a hygienic shower is clear to everyone. It is necessary for washing intimate places in order to maintain personal hygiene. Since it will be used often, the device of this equipment must be approached with all seriousness.

Hygienic shower consists of the following elements:

mixer without spout (single-lever or double-lever);
watering cans;
flexible hose;
watering can holder.

In some sources, a bidet or toilet with a bidet function is considered as a hygienic shower. However, this does not seem correct. A bidet and a toilet with a bidet function are independent sanitary equipment that allows you to perform personal hygiene procedures.

A shower, whether hygienic or otherwise, requires a watering can, a flexible hose and a mixer. Only such a complete set of equipment can be called a "shower". Therefore, it is precisely this that is considered further.

But there are also faucets that are installed directly into the toilet lid. These designs always provide one of two possible control methods: manual or electronic. Models of the second type are more modern and more expensive. The toilet sanitary shower with faucet can be purchased separately and installed by yourself.

Selecting an installation location

A shower for personal hygiene should be mounted where its use will be most convenient: in the immediate vicinity of the toilet. For a left-hander, this will be the left side, for a right-hander, it will be the right side. But not necessarily. It is rare to find families in which all household members are left-handed. Therefore, sanitary ware for personal hygiene is traditionally installed so that you can easily reach it with your right hand.

An important criterion for choosing a location is height. Here you need to take into account two factors at once: the position of the mixer and the watering can. When performing a personal hygiene procedure, both will be used. The optimal installation height of the hygienic shower in the toilet is as follows:

mixer - at the level of the upper forearm of the right hand (with the body position "sitting on the toilet");
watering can - to the right or left of it so that its holder is flush with the horizontal axis of the mixer.

This is the standard arrangement of shower elements on the toilet wall. Depending on the selected equipment configuration and the availability of free space, their location may be changed for reasons of ease of use.

Models of shower equipment for personal hygiene

Manufacturers of sanitary equipment offer a wide range of models of shower equipment. You can buy a ready-made kit or assemble it yourself, according to your preferences for design and functionality.

Installing a hygienic shower in a toilet is impossible without cups (reflectors), which hide the connection points to the water pipes. This must be taken into account when choosing a mixer. Each of them comes with cups. But the size (diameter) may not be suitable for specific connection points if, for some reason, there are defects next to them. The most common of them are chipped ceramic tiles.

Mixer selection

The mixer for a hygienic shower in the toilet can be single-lever or double-lever. There are no strict guidelines for this criterion. Everyone chooses the most convenient option for themselves. But to consider the advantages of different types of mixers will be useful.

What are good single-lever:

all manipulations are performed with one handle;
less time spent on personal hygiene procedures.

Double levers are good because you can choose a model with a wider cavity for mixing water. Thus, you can quickly "catch" a comfortable temperature. Those who regularly use single levers know that they have one drawback: it is not always possible to quickly find a handle position at which water of the desired temperature will flow.

Advantages of thermostatic mixers

Today there are the most modern types of mixers: with a thermostat (thermostat). They can be either with one control lever or with two. Faucets of this type allow you to set a comfortable water temperature once and will maintain it constantly.

Therefore, there is no need to spend time and effort on finding the optimal position of the levers. In addition, there is one more “plus”: by opening the tap, the child will not get burned by too hot water.

If a mixer with a thermostat is chosen for the shower device, it can be spaced with a watering can for a considerable distance. The fact is that equipment with a thermostat allows you to set a comfortable temperature and water pressure once. Which will be supported in the future.

Choice of watering can and flexible hose

The watering can and flexible hose can be purchased individually or as a set. It is better to choose the second option. Basic requirements for these elements of the soul:

tightness of connections among themselves;
anti-corrosion;
ease of use;
attractive appearance.

For a hygienic shower, it does not make sense to buy a long flexible hose. Quite short - 1.25 m. This is the standard length for shower sets of this type.

Installation options for a hygienic shower in the toilet

You need to think about how the hygienic shower in the toilet will be arranged at the stage of piping (if it is a new building) and choosing a place to install it (if it is an operated housing). There are three options for installing a hygienic shower:

Open.
Closed.
Connection to the sink.

Second: a hygienic shower with a flush-mounted thermostat is the most difficult, as it requires chasing the wall and laying pipes in the corresponding recesses. The first is simpler in connection technique, but less attractive from an aesthetic point of view.

However, it is he who is most often chosen when installing hygienic equipment in already inhabited premises. Not wanting to destroy the exterior finish of the tiles, the owners simply build up the pipes to the right place and connect the mixer to them. If desired, the installation site can be masked with a drywall box.

Therefore, how to connect a hygienic shower in the toilet is chosen based on various considerations:

practicality;
profitability;
installation speed;
ease of use.

Washbasin connection

Installation of a hygienic shower in a toilet by connecting to a sink is both simple and complex at the same time. It all depends on how open access to the pipes of the plumbing system is and whether the toilet already has a working sink.

If there is none, it is installed simultaneously with a hygienic shower as follows:

choose a place for the sink and watering can, mark on the wall;
determine how pipes will be laid and make strobes in these places;
lay pipes so that two connection points are obtained: hot and cold water;
determine the location of the sink and install it;
close the strobes with cement-sand mortar, plaster mix or tile adhesive;
connect the outlet of the sink to the sewerage system;
install a faucet on the sink, which should have a separate outlet for connecting a flexible hose;
connect a flexible hose to the mixer;
in a predetermined place, holes are drilled on the wall for installing a watering can holder;
install the holder;
connect the watering can to a flexible hose and install it in the holder.

But not every toilet in modern apartments has enough space to install a sink. For this reason, other variants of the hygienic shower device are used.

Connection to an existing plumbing system

In operated toilets, water and sewer pipes are hidden by building plasterboard boxes. To install a hygienic shower, this external protection will have to be dismantled. Then proceed as follows:

close the taps that regulate the supply of hot and cold water;
select the tie-in points of the tees and install them;
choose a method for laying pipes and install them, having previously connected them to tees;
wrap the threaded connections of the mixer with sanitary flax and / or fum fluoroplastic tape;
install mixer.
connect a flexible hose to it;
install the holder on the wall;
connect the flexible hose to the watering can.

In this installation method, the main difficulty will be the installation of pipes. They can be laid open or closed. But regardless of the gasket option, special attention is paid to the tightness of the joints.

Instead of two tees, only one can be installed: on a pipe with hot water. And connect to cold water from the outlet to the toilet. Sometimes this installation will be most convenient. The connection option is chosen based on the peculiarities of piping and connecting plumbing in a particular room.

If you take your time, carefully consider each step, installing a hygienic shower in the toilet will not cause any particular difficulties. Properly installed equipment will serve you well for many years.

It's no secret that most of us still use a bare minimum of plumbing fixtures that contains only the bare necessities.

This is by no means due to inertia of thinking, but to the banal lack of free space in the bathroom.

But this problem is not so insurmountable, because there are devices that make our life much more comfortable and at the same time do not pretend to be in short supply of square meters. Such is the hygienic shower for the toilet bowl with a mixer, which we will talk about.

A hygienic shower is very similar to a regular shower, only it is installed in the toilet and performs the same functions for which a bidet is intended. By resorting to this solution, the user benefits from the following:

Free space in the bathroom is maintained in the same volume. Therefore, it is possible to install a hygienic shower even in the smallest "Khrushchev". In the case of a stationary bidet, it would have to allocate almost as much space for it as for a toilet.
Ablution is performed without changing from the toilet bowl to any other device, which is very convenient. Especially if the user has difficulty moving due to illness or advanced age.
By operating the hygienic shower head, the user can position it however he pleases. In a stationary bidet, the nozzle is fixed in a certain position.
Equipping a bathroom with an option that is not only convenient, but also very healthy, costs mere pennies.

Along the way, a hygienic shower simplifies the solution of such problems as:

filling large containers with water;
washing the toilet;
rinsing a baby potty or cat litter box.

At the same time, the potential buyer must understand that the functionality of this device is minimal - it is capable of performing only the main action.

Faucet with hygienic shower

Additional features inherent in a full-fledged bidet (aromatization, disinfection and much more) will not be available. The shower also cannot heat water, so it must be connected not only to cold, but also to hot water supply.

Another important nuance: it is rather inconvenient for full people to use a hygienic shower.

Device

The hygienic shower consists of the following components:

Mixer. Performs the same function as a conventional basin faucet - it mixes hot and cold water flows in order to achieve a comfortable temperature. And it is arranged in the same way, only instead of a spout it is equipped with a fitting for connecting a flexible hose. The ratio of hot and cold water is regulated by a joystick (single-lever mixer), so that the adjustment, unlike a wing mixer, will need to be done only once. The same joystick regulates the pressure.
Flexible bidet hose. It usually has a length of 1.5 - 2 m. It consists of a polymer tube enclosed on the outside in a metal braid.
Hygienic watering can for a toilet bowl. It differs from a conventional shower head in its smaller dimensions and the presence of a normally closed locking mechanism, which is opened by pressing a button. Wanting to supply water, the user must press the button; as soon as he releases it, the water supply will stop.

Shower after installation

Said locking mechanism is for operational use only - it is not designed to be permanently pressurized. Therefore, after using a hygienic shower, the joystick on its mixer must be moved to the “closed” position. With this approach, the flexible hose will also last longer.

When no one uses the shower, the watering can is fixed on the wall holder.

As practice has shown, usually after using the shower, a certain amount of water flows from the watering can. Therefore, it is recommended to supplement the basic set with one more accessory - a container placed under the holder.

Kinds

First of all, various models of hygienic showers differ in the type of mixer.

There are such options:

Faucet without spout for outdoor installation. This device will be located in plain sight, so it has an attractive design.
Faucet without spout for concealed installation. Installed in a wall niche, so that only the joystick is visible from the outside. Pipes, of course, are also supplied in a hidden way. First of all, this option is suitable for a hanging toilet bowl, the supporting element of which is the so-called. installation - together with the cistern, it hides behind a false wall. The appearance of this mixer is simple, since it does not need a design, but much attention is paid to the reliability and tightness of the nodes.
Faucet with spout. This version of the showerhead is designed for combined bathrooms in which the sink is located next to the toilet. A mixer with a spout is installed on the sink in the same way as a conventional one, while it works as follows: when the joystick or lever is moved to the “open” position, the water is directed to the spout; as soon as the user presses the button on the watering can, the flow is redirected to the shower.

This solution has a big plus: it turns out that the valve in the watering can and the flexible hose are not subjected to water pressure at all, even for a short time. As soon as the user releases the button on the watering can, the flow of water will immediately be redirected to the spout.

The location of the hygienic shower

This mode of operation has such a good effect on the durability of the watering can and hose that manufacturers recommend even in separate bathrooms, if space permits, install small sinks next to the toilet and use a hygienic shower with a spout.

In particularly cramped conditions, such a sink can be placed above the toilet tank. In addition to extending the life of the soul, we get two more benefits:

after using the toilet, you can always wash your hands, even if the bathroom is occupied;
the holder can be placed above the sink - then nothing will need to be substituted under it.

A hygienic shower can also be connected to a conventional faucet with a shower outlet (also conventional), but this option is not without drawbacks:

it will not work to redirect the flow by pressing the button on the watering can - you will also need to switch the mixer itself;
after releasing the button on the watering can, its valve and hose will be under pressure.

A hygienic shower is installed next to the toilet

In addition to the type of faucet, showers can differ in how the temperature is adjusted. There are two varieties:

Manually adjustable.
Equipped with a thermostat. After the user sets the required water temperature on the thermostat scale, the device will maintain it independently.

This is very convenient because:

the temperature does not have to be adjusted every time;
water will be used more economically (with manual adjustment, a lot of liquid manages to escape);
eliminates the risk of burns.

The last difference is the material of the watering can and the mixer. The watering can be plastic or brass. The first option is cheaper, but it is also less durable.

Sanitary shower with exposed mixer

The mixer can be brass, bronze or silumin (aluminum-silicon alloy). The last option is the cheapest, but experts do not recommend purchasing it. The fact is that even the highest quality silumin is subject to the so-called. intergranular corrosion, which cannot be visually detected. Thanks to her, the silumin mixer is very likely to fall apart one day.

It is worth talking about other devices that perform the functions of a bidet, but do not take up additional space. These are:

Toilet-bidet: a retractable nozzle is built into the bowl. When the user uses the toilet for its intended purpose, it is hidden and does not interfere with this process, but for ablution it must be pulled out.
Bidet cover: this device is suitable for those who have already installed a conventional toilet. The idea is similar to the previous one, only retractable nozzles and other equipment are not built into the toilet, but into the lid for it.

In the simplest version, the bidet cover performs only the main function, while the water temperature is controlled by manually mixing hot and cold streams.

More advanced models are connected to electricity and can perform a number of additional actions:

heat water with an electric heater (no need to connect hot water);
warm up the toilet seat
extract air or filter it (odors are removed);
dry the user after washing with a hairdryer and much more.

The bidet lid is installed in exactly the same way as a regular toilet seat lid.

As you can see, electronic bidet covers are significantly superior in functionality to a hygienic shower, but they are much more expensive. The budget model will pull on 11 - 18 thousand rubles, and for a high-quality, for example, Japanese, you will have to pay about 30 thousand rubles.

Connection

To connect a hygienic shower mixer, you need to make an insert into cold and hot water pipes.

It is most convenient to connect to the cold one in the place where a branch to the toilet bowl is already organized.

Here's how to do it:

The water supply is shut off by the root valve or located at the outlet to the tank. In the first case, you will still need to relieve the residual pressure in the pipes by opening a tap in the kitchen or bathroom.
A flexible hose leading to the tank is disconnected from the pipeline.
Instead of a disconnected eyeliner, a tee is screwed to the branch. It is highly desirable that there is a shut-off valve in front of it - if it was not installed earlier, this can be done now. All threaded connections are sealed with FUM tape or sanitary flax.
A flexible hose from the tank is connected to one of the branches of the tee.
We connect a non-return valve to the second outlet, and then a flexible connection for a hygienic shower mixer.

Scheme for connecting any hygienic shower to a riser

A non-return valve to the cold line must be installed when connecting a mixer without a spout. The fact is that the pressure in the hot water supply is much higher than the pressure in the cold one, so that with the mixer open and the watering can closed, hot water would be transferred to the cold riser.

To connect the mixer to hot water, a tee must be inserted into the corresponding pipeline.

The mixer itself, depending on the type of fastening, is screwed directly to the wall or to a mounting plate installed on it.

It remains to screw a flexible eyeliner to the mixer. It is not necessary to seal the connections to the flexible hose, as it is already equipped with gaskets.

When screwing the shower to the faucet, it is important not to forget to install gaskets in the place where the hose is attached to the watering can, as well as between the hose and the faucet.

Hygienic shower on the toilet with a mixer

Sometimes it can be difficult to find a convenient place on the wall to mount the faucet. In such a case, showers are produced with a mounting bracket in the kit, screwed directly to the toilet.

It is necessary to unscrew the lid from the bowl, then place the bracket on the shelf and return the lid to its place. Being screwed, it will securely fix the bracket, on which it will then be possible to fix the mixer.

What the market has to offer

It is certainly convenient to have a bidet in the bathroom, but not every apartment can have it. But this does not mean that a small bathroom is a reason to refuse such a procedure. There are several different ways to organize the conditions for this procedure:

All of the above methods are good. But it is the mixer for a hygienic shower that is the most attractive solution. There are models for the installation of which do not require repair and complex manipulations. You can connect the device to an existing system, or you can put a faucet with a special tap on the sink, to which you can connect a hygienic shower head. We will talk further about the varieties of these devices and the features of their connection.

Pros and cons compared to a bidet

There is no need to argue about what is more convenient - a pair of toilet + bidet or a hygienic shower for the toilet. Everyone decides for himself. Let's take a quick look at the main pros and cons of both devices:

Oddly enough, it is the latter fact that is often decisive - an additional bonus in the form of extended functionality is always pleasant. The pluses of showers include the possibility of organizing for relatively little money. But this is about devices with a mixer.

Types of hygienic showers with a mixer

According to the installation method, there are two types of faucets for hygienic showers with mixers:

for sink;
wall-mounted
- internal installation
- outdoor installation.

Each of these options has pros and cons.

On the sink

If you put a hygienic shower on the sink, installation becomes much easier. All that is needed in this case is to replace the mixer. It has a separate outlet to which a flexible hose with a watering can is connected. All you have to do is mount the holder on the wall. The location of the sink in this case is also important. Ideally, if you can reach the tap without getting up. Since such models have the following feature of work: first, the faucet on the washbasin is turned on, the water temperature is set on it. Water naturally flows into the sink. When you press the button on the shower, the faucet is blocked, water flows through the watering can. As soon as the key was released, the water again poured into the sink. Here is the principle of operation.

Installing a hygienic shower on a sink is easy and simple

Wall mounted concealed

If you chose the wall-mounted option, the complexity of the installation depends on how you plan to install it. Often in the bathroom or toilet there is a niche in which all communications are hidden. Often it is located behind the toilet or somewhere nearby. In this case, you can connect there, and install the mixer on the shield or come up with some other option.

Regular installation provides for wall chasing, laying hot and cold water supply pipes into the strobes, and at the final stage - installation of the mixer itself.

Wall-mounted surface mounted (with thermostat)

These are not all varieties. There is also a hygienic shower with a mixer, which is connected only to cold water. This does not mean that the procedures are carried out with cold water. It's just that a flowing electric heater is installed in the case. Such models are only for outdoor installation, since you cannot wall the thermostat into the wall. Connection to water - using a flexible hose, the device itself is attached to the wall with dowels or other suitable fasteners.

The temperature is set on the regulator, maintained accurately. Only immediately after switching on, you need to wait a while - a few seconds until the heating element warms up. A very good option for those who do not have hot water in the toilet (or at all). Yes, remember that these models require an electrical connection.

An interesting installation option without gating in the next video - the liner is laid over the walls, but closed with a box. It also has a watering can holder. It is worth paying attention to those who do not foresee repairs in the toilet or bathroom.

Where to put

The installation height of the hygienic shower for the toilet is chosen almost arbitrarily. The only requirement is that the faucet must be installed above the toilet. There are no other restrictions.

The installation location is absolutely arbitrary, the main criterion is ease of use, which is difficult to achieve in small bathrooms. Therefore, we recommend that before making a final decision, it is good to think over everything and do all the actions with the watering can. This is the only way to be sure that it will be really convenient to use.

Mounting Features

It is possible to say specifically how to install a hygienic shower for a toilet bowl only on the spot. There are too many different nuances that it is simply impossible to take into account. The principle of connection is simple: supply cold and hot water to the corresponding inputs. That's all. And how to do it, with pipes or flexible piping - the choice is yours. Of course, pipes are more reliable, but high-quality flexible hoses in a good braid can last for years.

There is only one nuance that is worth remembering. When connecting a hygienic shower to hot and cold water (centralized system), we must install ball valves and check valves. Taps are almost always installed, but check valves are often forgotten.

This is a check valve. During installation, turn it so that the arrow on the body coincides with the direction of water flow

They are needed so that water from the “cold” riser is not mixed into the hot one and vice versa. Usually, just the opposite happens - you open cold water, and boiling water flows from there, but there are also reverse cases - hot water periodically becomes not hot at all. This is all because someone on your riser didn't install a check valve when you connected the hygienic shower to the toilet. The tap was opened, the shower is not used yet, and through the open mixer, water from one riser is mixed into another. Which water goes where depends on where the pressure is higher. Usually higher in hot risers (almost twice), because such cases are more common. But mixing cold is possible. In general, do not forget to put shut-off valves. They cost mere pennies (compared to the cost of equipment), but they prevent unpleasant situations and proceedings with an operational campaign and “happy” neighbors.